fascias.com

A light in weight yet strong and cost effective option, the FloPlast ABS SolventWeld System is available in 32mm, 40mm and 50mm sizes with an extensive range of fittings to meet most installation requirements.

Waste Systems Fixing Guide
Install and test system in accordance with BS EN 1610:1998.
 Fix pipe brackets at maximum 1.2m centres vertical and at maximum 0.5m centres horizontal for 32mm
 An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems.
 For solvent weld installations incorporate expansion ring seal couplings at relevant points for long pipe runs.
 It is recommended that ABS and Polypropylene waste systems where externally installed are protected against prolonged exposure to sunlight with exterior gloss paint.
 For solvent weld systems ensure the pipe is cut square, all swarf removed and cleaning fluid applied to both surfaces of joint. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing system.

Description:
A lightweight yet strong and cost-effective option.
Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth.
Allow five minutes to set before handling and twelve hours before testing the system.

Manufactured to BS EN 1455-1: 2000 / BS 5255

Colour:
White

Dimesnions:
32mm x 3m Waste Pipe White

Description:
32mm 90 degree knuckle bend, solvent weld . A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth.
Allow five minutes to set before handling and twelve hours before testing the system.

Manufactured to BS EN 1455-1: 2000 / BS 5255

Colour:
White

Dimesnions:
32mm 90 degree

Description:
32mm 90 degree conversion bend, solvent weld . A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth.
Allow five minutes to set before handling and twelve hours before testing the system.

Manufactured to BS EN 1455-1: 2000 / BS 5255

Colour:
White

Dimesnions:
32mm 90 degree

Description:
32mm 90 degree solvent weld swept bend, solvent weld . A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth.  Allow five minutes to set before handling and twelve hours before testing the system.

Manufactured to BS EN 1455-1: 2000 / BS 5255

Colour:
White

Dimesnions:
32mm 90 degree

Description:
32mm 135 degree solvent weld branch, solvent weld . A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth.  Allow five minutes to set before handling and twelve hours before testing the system.

Manufactured to BS EN 1455-1: 2000 / BS 5255

Colour:
White

Dimesnions:
32mm 135 degree

Description:
32mm 135 degree solvent weld bend, solvent weld . A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth.  Allow five minutes to set before handling and twelve hours before testing the system.

Manufactured to BS EN 1455-1: 2000 / BS 5255

Colour:
White

Dimesnions:
32mm 135 degree

Description:
32mm straight solvent weld joint. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth.  Allow five minutes to set before handling and twelve hours before testing the system.

Manufactured to BS EN 1455-1: 2000 / BS 5255

Colour:
White

Dimesnions:
32mm

Description:
32mm solvent weld pipe clip. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth.  Allow five minutes to set before handling and twelve hours before testing the system.

Manufactured to BS EN 1455-1: 2000 / BS 5255

Colour:
White

Dimesnions:
32mm

Description:
32mm x 40mm solvent weld reducer. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth.  Allow five minutes to set before handling and twelve hours before testing the system.

Manufactured to BS EN 1455-1: 2000 / BS 5255

Colour:
White

Dimesnions:
32mm x 40mm

Description:
32mm solvent weld tank connector. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth.  Allow five minutes to set before handling and twelve hours before testing the system.

Manufactured to BS EN 1455-1: 2000 / BS 5255

Colour:
White

Dimesnions:
32mm

Description:
32mm solvent weld branch 90 degree. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth.  Allow five minutes to set before handling and twelve hours before testing the system.

Manufactured to BS EN 1455-1: 2000 / BS 5255

Colour:
White

Dimesnions:
32mm 90 degree

Description:
32mm Access Plug. A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth.  Allow five minutes to set before handling and twelve hours before testing the system.

Manufactured to BS EN 1455-1: 2000 / BS 5255

Colour:
White

Dimesnions:
32mm

Telephone Orders

We are happy to take your order or enquiry by phone

Please call us on 0117 971 9922

We are open 8am - 6pm Monday to Friday & Saturdays 8am - 12pm

© Copyright 1994-2012, Master Plastics (SW) Ltd Bristol | Clevedon. All rights reserved world-wide.

Many of the images on this site do not belong to us. Do not copy or link directly to them. Contact us so we can seek permission where necessary on your behalf.

WE DELIVER UK NATIONWIDE ENGLAND SCOTLAND WALES AND IRELAND..