Polycarbonate Self Supporting Bars
system40
Self supporting 85’ Heavy Duty Bar is for larger lean-to roofs or commercial glazing applications where longer spans or heavier loading specifications are required. It has a maximum self supporting span of up to 4.15 metres at 600mm centres when used with 16mm to 25mm polycarbonate sheet. When using glass units contact us  for spanning details.
!

Self Supporting Bar 2.5m
!
15% Off when you order two or more of the same bar type/length
System 85 self supportng heavy duty main bar 2.5m Pack includes one end cap

Self Supporting Bar 3.0m
!
15% Off when you order two or more of the same bar type/length
System 85 self supportng heavy duty main bar 3.0m Pack includes one end cap

Self Supporting Bar 4.0m
!
15% Off when you order two or more of the same bar type/length
System 85 self supportng heavy duty main bar 4.0m Pack includes one end cap

Self Supporting Bar 6.0m
!
15% Off when you order two or more of the same bar type/length
System 85 self supportng heavy duty main bar 6.0m Pack includes one end cap

Self Supporting Bar 2.5m Edge Bar
!
15% Off when you order two or more of the same bar type/length
System 85 self supportng heavy duty edge bar 2.5m Pack includes one end cap

Self Supporting Bar 3.0m Edge Bar
!
15% Off when you order two or more of the same bar type/length
System 85 self supportng heavy duty edge bar 3.0m Pack includes one end cap

Self Supporting Bar 4.0m Edge Bar
!
15% Off when you order two or more of the same bar type/length
System 85 self supportng heavy duty edge bar 4.0m Pack includes one end cap

Self Supporting Bar 6.0m Edge Bar
!
15% Off when you order two or more of the same bar type/length
System 85 self supportng heavy duty edge bar 6.0m Pack includes one end cap

Vairiable Pitch Wall Plate 3.0m
!
Vairiable Pitch Wall Plate 3.0m Our Variable Pitch ‘Wallplate’ is very simple to install between 2.5º to 30º pitch. When screw fixed to the wall, bars bolt onto the wall plate and glazing is pushed up into the glazing aperture and sealed effectively. The wall plate flashing should be fitted and finished before the roof sheets go on prior to fitting the roof.

Vairiable Pitch Wall Plate 4.0m
!

 

Vairiable Pitch Wall Plate 4.0m Our Variable Pitch ‘Wallplate’ is very simple to install between 2.5º to 30º pitch. When screw fixed to the wall, bars bolt onto the wall plate and glazing is pushed up into the glazing aperture and sealed effectively. The wall plate flashing should be fitted and finished before the roof sheets go on prior to fitting the roof.

Vairiable Pitch Wall Plate 6.0m
!

 

Vairiable Pitch Wall Plate 6.0m Our Variable Pitch ‘Wallplate’ is very simple to install between 2.5º to 30º pitch. When screw fixed to the wall, bars bolt onto the wall plate and glazing is pushed up into the glazing aperture and sealed effectively. The wall plate flashing should be fitted and finished before the roof sheets go on prior to fitting the roof.

Vairiable Pitch Wall Plate Joint
PT85WPJB
!
tn_system405_gif
Use when joining two sections of wall plate
White Only

Vairiable Pitch eaves Beam 3.0m
!

 

Variable pitch eaves beam 3.0m for polycarbonate roofs with pitches from 2.5 degrees to 30 degrees

Provides a strong and simple solution to fix bars at the eaves on top of the windows or up-stands. A flipper gasket seals between the glazing bars. The eaves beam can be fixed from either above or below and is variable pitch from 2.5º to 30º

Vairiable Pitch Eaves Beam 4.0m
!

 

Variable pitch eaves beam 4.0m for polycarbonate roofs with pitches from 2.5 degrees to 30 degrees

Provides a strong and simple solution to fix bars at the eaves on top of the windows or up-stands. A flipper gasket seals between the glazing bars. The eaves beam can be fixed from either above or below and is variable pitch from 2.5º to 30º

Vairiable Pitch eaves Beam 6.0m
!

 

Variable pitch eaves beam 6.0m for polycarbonate roofs with pitches from 2.5 degrees to 30 degrees

Provides a strong and simple solution to fix bars at the eaves on top of the windows or up-stands. A flipper gasket seals between the glazing bars. The eaves beam can be fixed from either above or below and is variable pitch from 2.5º to 30º

Vairiable Pitch Eaves Beam Joint
PT85EBJB
!
tn_system403_gif
Use when joining two sections of eaves beam White Only

Fixing Bolts
PTCFB
!
sorry
Bar to wall plate fixing bolts x 2 required per bar. Sold in bags of 10

10 mm sheet closure
!
10upw
10mm x 2.1m sheet closure use with twin wall sheets use on the bottom edge of the sheets on top of the anti dust tape. (Sheet closures act as a drip into the guttering and protects tape)

16mm Sheet Closure
!
10upw
16mm x 2.1 sheet closure use with triple wall sheets use on the bottom edge of the sheets on top of the anti dust tape. (Sheet closures act as a drip into the guttering and protects tape)

25mm Sheet Closure
!
10upw
25mm x 2.1 sheet closure use on the bottom edge of the sheets on top of the anti dust tape. (Sheet closures act as a drip into the guttering and protects tape)

Anti Dust Tape
XSAT
!
xsat
Price per metre solid tape use at top of sheets

Vented anti dust tape
XADT
!
xdat
Price per metre vented tape use on the bottom of sheets

Black Jack Flashing 100mm
EBBJF100
!
Self adhesive flashing with a natural lead look finish
100mm x 10m roll

Black Jack Flashing 150mm
EBBJF150
!
Self adhesive flashing with a natural lead look finish
150mm x 10m roll

Black Jack Flashing 225mm
EBBJF225
!
Self adhesive flashing with a natural lead look finish
225mm x 10m roll

Polycarbonate Silicone
S25CP
!
s25cp
Silicone designed with polycarbonate in mind

Polycarbonate Skylight - For 16mm Polycarbonate.
!
10% Off When You Order Two Or More Sky Lights Online....

750mm long x 550mm wide (external sizes) Polycarbonate skylight for 16mm triple wall sheets

Available with chrome or brass eye spindles in white, brown or caramel (light oak) colours

Optional extendable 1.5m - 2.5m mahogany and brass effect handle.

 

 Download Dimensions

Polycarbonate Skylight - For 25mm Polycarbonate.
!
10% Off When You Order Two Or More Sky Lights Online....

750mm long x 550mm wide (external sizes) Polycarbonate skylight for 25mm five wall sheets.

Available with chrome or brass spindles in white, brown or caramel (light oak) colours.

Optional extendable 1.5m - 2.5m mahogany and brass effect handle.

 Download Dimensions

Telephone
!

Telephone Orders

We are happy to take your order or enquiry by phone

Please call us on 0117 971 9922

We are open 8am - 5pm Monday to Friday & Saturdays 8am - 12pm

© Copyright 1994-2009, Master Plastics (SW0 Ltd Bristol | Clevedon. All rights reserved world-wide.

Many of the images on this site do not belong to us. Do not copy or link directly to them. Contact us so we can seek permission where necessary on your behalf.

WE DELIVER UK NATIONWIDE ENGLAND SCOTLAND WALES AND IRELAND..